Candidate has completed university education II. degree at the Faculty of Mechanical Engineering, focusing on Environmental Engineering. He will finish III. level focusing on the Energy Machines and Equipment Division. He wrote his thesis on "The design of a flue gas heat exchanger by mixing atmospheric cooling air", which deals with the use of different types of waste heat of flue gas as a source of secondary energy, heat exchangers, their distribution and utilization. In the thesis he deals with the issue of heat exchanger bypasses for the recovery of heat from the flue gas. He designed a 3D model in Autodesk Inventore, which was used to simulate cooling. He succeeded in lowering the temperature from 50 to 5°C. He defended his thesis on the mark "A". Dissertation thesis deals with "Minimization of energy inputs for generation of natural gas and biomethane hydrates". During his studies at the university he attended a study stay (Erasmus) in Portugal and a professional internship in Poland. He has experience with the use of Autodesk Inventor, AutoCAD, CADvent, TechCON and Ansys Workbench simulation software. He has an advanced level of English (B1 / B2), which he used mainly during Erasmus, but also in attending various foreign conferences. The candidate has good communication and presentation skills, a pleasant performance. He is interested in new technologies and he was particularly interested in thermodynamics and hydrodynamics.
Register for free right now and get access to working history and education.